Featured Products

LED piraña Blanco Frío 3.000mcd - 80º
The Superflux or Piranha LEDs have a square format, for that have a wide beam and a high luminosity (80°). How To Use: Below the dome there are two extended legs: the longer leg is the positive polarity, called anode and the shorter...

The Superflux or Piranha LEDs have a square format, for that have a wide beam and a high luminosity (80°).

How To Use:
Below the dome there are two extended legs: the longer leg is the positive polarity, called anode and the shorter leg is the negative polarity, called cathode. These legs indicate the way in which the LED should be connected to the circuit.

These LEDs can be used in three different ways:
- Individual: LED power directly from the power supply, either by means of a regulated supply, or with the use of resistors or regulators. It must supply the LED the desired voltage in work values.
- Parallel configuration: Powering a group of LEDs connecting all of the anodes together and all of the cathodes together, using the required tension regulated by a single resistor in series.
- Series configuration: powering a group of LEDs connected sequentially. The number of LEDs used for series is limited by the voltage delivered by the power supply. In most cases a resistor is required to compensate for voltage differences per series of LEDs. Various parallel series can perform using the same power source.

Polarization: the positive pole of the power supply must be connected to the anode, the longer leg (or the beginning of the series), while the negative pole must be connected to the cathode, the shorter leg (or the end of the series).

Applications: They are usually used for signals, decoration and signs. They also are often adapted for automotive use and as replacements for fluorescent bulbs.

Technical Data

Beam Pattern: 80 º

Working Current: 20mA

Working Voltage: Power Supply Recommendations:

- DC3.1V @ 20mA: -Blue and Cool White
   - Voltage min. Power:  DC2.8V
   - Voltage max. Power: DC3.6V

Size: 0.19" x 0.19" (square format)

Available colors:  blue and cool white. Coming soon in green, red, RGB, yellow and warm white colors and Superflux LEDs triple chip with the same format, but with the double of light.

Attention: The Operating Voltage of this product is DC; never connect it to AC directly.

For optimum performance, do not exceed maximum load and the Power Supply should be 20% (approx.) stronger (Amps) than the total required to run your system.

Don’t forget to buy the following:

-constant current resistors ,

-power supply (We recommend DC3.3V @ 20mA ),

 

All specifications are subject to change without notice

From
$
Qty.
Mini RGB Controller
This Ultra Slim Mini Controller is ideal for systems that require an RGB controller with basic functions and minimum outputs and can be installed where there is limited space.   How to Use: 1. Connect LED Strip to the 4-pin c...
This Ultra Slim Mini Controller is ideal for systems that require an RGB controller with basic functions and minimum outputs and can be installed where there is limited space.
 
How to Use:
1. Connect LED Strip to the 4-pin connector´s wires. Make sure the cable is well insulated and doesn’t create a short circuit.
2. Connect the +12V cable to DC12V power supply. Make sure the cable is well insulated and doesn’t create a short circuit.
3. Power on and play.
 
Operation:  
1. MODE key: Switch to dynamic mode. Press this key to switch among 20 dynamic modes. (Hold the MODE key for one second, this will switch to demo mode, which automatically loops the colors from dynamic mode)
2. COLOR key: Switch to static color mode. Press this key to switch among 20 static colors.  
3. SPEED/BRIGHTNESS key: Adjust speed or brightness. At dynamic mode, press this key to change the effect speed among 5 levels; at static color mode, press this key to change color brightness among 5 levels.  
4. On/Off: Press and hold SPEED/BRIGHT key for 1 second to turn off unit. At off mode, press any key to turn on and revert to previous status.
 
Technical Data:
Working Voltage: DC12V (input)
Working Current: 1A per channel (output) - 3Amps total
Connection Mode: common anode(+)
Channels: 3 (RGB)
Connection type: 4-pin connector (+,R,G,B)
Size (LxWxH): 1.65”  x 0.47”  x 0.19” (42mm x 12mm x 5mm)
Wire Length: 3.93” (100mm)
 
Notes
The Operating Voltage of this product is DC. NEVER plug a DC LED Light directly into a wall outlet as this can cause you harm and will damage your LED Ligths.
For optimum performance, do not exceed maximum load.
 
Don’t forget to buy the following:
- DC12V Power Supply: It depends on the quantity or length of the LED Light you will setup. For best use, it should be about 20% stronger (Watts/Amps) than the total required to run your system. How?
All specifications are subject to change without notice
From
$
Qty.
Panel LED 10W BLANCO CÁLIDO 3000°K 220V para empotrar
El panel circular de 10W tiene un diseño ultra delgado y elegante. Es de fácil instalación y está construido con materiales de alta calidad, otorgando resistencia y larga vida útil. Recomendado para usos...

El panel circular de 10W tiene un diseño ultra delgado y elegante. Es de fácil instalación y está construido con materiales de alta calidad, otorgando resistencia y larga vida útil.

Recomendado para usos comerciales como así también para uso hogareño,  ya que reduce el consumo de energía eléctrica manteniendo el rendimiento lumínico tradicional.

From
$
Qty.
MR16 Spotlight LED Bulb - GU5.3 - 3W- RGB / Color Changing
This MR16 RGB Spotlight LED bulb is a product of high integration of electronic components, perfect for replacing any bulb with GU5.3 base.   It included 24 Key IR remote: 16 static colors, brightness adjustment (dimmer) and 4 li...
This MR16 RGB Spotlight LED bulb is a product of high integration of electronic components, perfect for replacing any bulb with GU5.3 base.
 
It included 24 Key IR remote: 16 static colors, brightness adjustment (dimmer) and 4 lighting functions (flash, strobe, fade and smooth)
 
The RGB LED emits three basic colors (Red, Green and Blue). It comes with a remote control to change the different options and select effects, colors and turn on and off the bulb (doesn´t need a RGB controller).
 
This product operates on low-voltage DC12V power.  Your power demand will depend on the quantity of these LED Bulbs you use. They require 220mA/3W each. You must multiply the number of LED Bulbs you will setup for 3W, with the result of this multiplication you can choose from one of our power supplies that is greater than that variable. For best use, the power supply should be 20% (approx.) stronger (Watts/Amps) than the total required to run your system. How???
 
Uses: ideal for lighting effects, as well as for decorating windows, clubs or restaurants, and others.
 
Technical data:
Working Voltage: DC12V
Working Current: 220mA (with 3 colors on)
Total Power Consumption: 3W
 
Dimensions: Diameter: 1.96" x H2.16"
 
Optical Characteristics:
Brightness:
Red: 30Lm
Green: 50Lm
Blue: 15Lm
Luminous Flux:
Red 120Lux;
Green: 230Lux;
Blue: 160Lm
Wavelength:
Red: 620-630nm
Green: 520-530nm
Blue: 460-470nm.
Beam Pattern: 35°
 
Base: GU5.3
For indoor use only (in dry conditions) - Outdoor use requires a weather protected fixture
 
Notes:
1) For optimum performance, do not exceed maximum load.
2) This product operates on low-voltage DC12V power
.
3) Do not look directly into the light, it can cause damage to your eye site.
4) Please confirm voltage, wattage and size before ordering!
5) 2-YEAR WARRANTY
6) Available Colors: cool white, warm white, red, green, blue, yellow and RGB.
 
Don´t forget to buy the following:
DC12V power supply : It depends on the quantity of these LED Bulbs you will setup. For best use, it should be about 20% stronger (Watts/Amps) than the total required to run your system. (how?) This must be DC - not AC. (NEVER plug a DC LED directly into a wall outlet as this may cause you harm and will damage your LED Lights)
 
All specifications are subject to change without notice
From
$
Qty.
ACLARACIÓN: Los precios NO incluyen IVA.
Los valores pueden corresponder a compras por cantidades mayores a 1 unidad.
Los precios se encuentran actualizados al 15/10/18.